ImperGuard® Ultra 4 in 1

4 in 1 Protection for Porous Materials

ImperGuard® Ultra 4 in 1 provides total protection for all porous building materials. It is a powerful sealer which keeps out water and stains while also consolidating and strengthening materials and actively inhibiting organic growths.

ImperGuard® Ultra 4 in 1 is a non film forming impregnation product. Substrates can breathe naturally as the product does not inhibit air or water vapour permeability. The product is completely invisible once cured and does not change the look or texture of the surface. This also means it won’t make surfaces slippery. It is completely UV stable and will not yellow with time.

Key Features

• 4 in 1: Water Repellent, Anti Microbial, Anti Stain, Remineralisation
• Self Cleaning Technology
• Effective for 5 years, Maintenance Free!
• Easy to Apply with Tracer Effect – Goes down white dries clear.
• Invisible protection
• Water based, Low VOC, Easy Clean-up
• UV and frost resistant

Action 1: Water Repellent Sealer

ImperGuard® Ultra 4 in 1 prevents penetration of water into the substrate. As a result it eliminates all types of issues associated with water ingress such as: acid rain, erosion, freeze/thaw damage, water staining and water damage.

Action 2: Anti Microbial Sealer

ImperGuard® Ultra 4 in 1 actively inhibits the metabolism of microbes that come into contact with the treated surface. This prevents all types of organic growths such as algae, mould, moss, mildew, lichens and fungi.

Action 3: Stain Repellent Sealer

ImperGuard® Ultra 4 in 1 stops stains from penetrating into the substrate. Prevents all sorts of soiling, even from greases. Utilises the latest in self cleaning technology. Most stains and spills will simply wash off. Very easy to keep clean.

Action 4: Consolidating Sealer

ImperGuard® Ultra 4 in 1 provides remineralisation to porous materials. Thereby stabilising friable materials, reducing porosity and improving overall strength. Provides excellent protection against salt damage.

ImperGuard® Ultra 4 in 1 is an Eco Sealer

At Guard Industry we strive to create high performance products that don’t harm people or the planet. ImperGuard® Ultra 4 in 1 is an environmentally friendly sealer. It is safer for applicators, end users and the environment.

• Contains no petroleum solvents
• Non Hazardous
• Biodegradeable by more than 90%
• VOC <2 g/L

Preparation

• • Apply the product to a clean, dust-free, grease-free and dry surface.
  • To remove grease stains and traces of pollution use Guard Cleaner® Facades or Guard Wash®for traces of efflorescence, laitance or grout film use Guard Remover® Eco Efflorescence & Cement.
  • Rinse carefully until the surface is free of any trace of cleaner.

Application

• • Use the product in its pure form: do not dilute it.
  • Shake the packaging well before use and perform a preliminary test to check that the product has correctly penetrated and the appearance after drying.
  • The material must be impregnated up to saturation in two to four coats “wet on wet” depending on the porosity.
  • Always apply from bottom to top.
  • Do not overload the material, remove any excess before drying. Risk of white marks.
  • Protected drying: 24 hours.
  • Optimum efficiency reached after 7 days.

Uses

• • Porous materials: natural or reconstituted stone, plaster, concrete, tile, brick, terracotta, slate, etc.
  • Walls, Floors, Roofs
  • New or old
  • External

Indicative Coverage

• • ​S6-8m2/Litre
  • ​Coverage will vary depending on the porosity of the surface.

Tools Required

• • Low pressure sprayer, roller or brush